Plaza Paver Title

Property Value Test Methods
Paver Type    
  • Architectural Paving Stone, Hydraulically Pressed with 400 Tons of Pressure (Minimum).
  • Designed specifically for use on rooftop applications.
  • Suitable for high yield traffic, Plazas, Terraces and Walkways.
  • For use in conjunction with approved pedestals, drainage mats and protection sheets.
SPRI Specifications

Composition     
  Aggregate ASTM  C-33
  Cement ASTM  C-150
  Pigment ASTM  C-979

Dimensions (Nominal)    
Standard Block    

Plaza Paver

 

Length   (L)  Width    (W)  Height   (H) Chamfer (C) Unit Weight (lbs) Weight Per S.F. (lbs) Bearing Surface (sq. in.)
30” 30” 2-1/4”  3/16" 170 27 900
30” 30” 2”  3/16" 150 24 900
             
24” 24” 2”  3/16" 96 24 576
24” 24” 1-3/4”  3/16" 84 21 576
24” 24” 1-1/2”  3/16" 72 18 576
             
18” 18” 2”  3/16" 54 24 324
18” 18” 1-3/4”  3/16" 47 21 324
18” 18” 1-1/2”  3/16" 40.5 18 324
             
12” 12” 2”  3/16" 24 24 144
12” 12” 1-3/4”  3/16" 21 21 144
12” 12” 1-1/2” 3/16" 18 18 144

Concrete Properties (Nominal)    
Unit Density      150 pcf  SPRI/ASTM C-140
Compressive  Strength   8,500 psi    SPRI/ASTM C-140
Flexural Strength 1,100 psi SPRI/ASTM C-140
Water Absorption   Less than 5% SPRI/ASTM C-140
Freeze/Thaw Resistance   50 Cycles SPRI/ASTM C-67
 

Standard Colors and Finishes    



Send mail to info@roofblok.com with questions or comments about this web site.
Copyright © 2006 Roofblok Limited
Last modified: May 27, 2006